Welcome on D3scene.com! Make sure to 
[project] linking tnt's
Posted 02-10-2008 at 08:43 PM by 35yeros
DISCAMIER: dont be an idiot with any of my inventions, dont use any of my invertions to intentionsally harm other ppl, dont look into the explsoino or a tnt, dont crack under presseure from peers and do somthing that could be fatal, (god i am sounding like my mom...dont, dont, dont lol) and always take the necessary percautions to prevent injury. and lastly, have fun!!!
by reading any part of this article you are bound to this agrement
DISCAMIER2: DONT DO THIS UNLESS YOU HAVE A FIRE EXTINGHUSER HANDY!!!!
fun factor: low
prep time: high, it really depends on if you have the materials, and how big of a brand your gona make.
risk of accident: this is determinted on your stupidy level, so in my case, moderate =)
cost of making: well tnt's are cheap after the 4 o july in the us, that usully where i get mine form. other wise they can be pricy
tnt's as i commonly refer to them are more know as tnt poppers, (not fire works) they look like (this is a big box of em) (duh)
ok so what ya do is first strip off the cardboard covering (the thing that hold the stremers in) then take out the "guts" (the stremets) you then should see the fuse, its a littel string with what appears to be paper wrapped around it. pull it out (no dont set it off) just use some needle nose plires or ur finger to grab it and pull softly you dont wat it going off, (it wont hurt if it does, but it isnt a plesent felling) and wa-la you got one, most of my stuff takes 20-500 so...have fun =)
to truly link them, simply hot glue the strings togeather to form a long chaning the TAPE DONT GLUE the fuses togeather, if you glue them they MAY go off due to extreme heat, your done!!!!
note: i have blow may of these up in my hands they dont hurt to bad, but they arent great felings.
by reading any part of this article you are bound to this agrement
DISCAMIER2: DONT DO THIS UNLESS YOU HAVE A FIRE EXTINGHUSER HANDY!!!!
fun factor: low
prep time: high, it really depends on if you have the materials, and how big of a brand your gona make.
risk of accident: this is determinted on your stupidy level, so in my case, moderate =)
cost of making: well tnt's are cheap after the 4 o july in the us, that usully where i get mine form. other wise they can be pricy
tnt's as i commonly refer to them are more know as tnt poppers, (not fire works) they look like (this is a big box of em) (duh)
ok so what ya do is first strip off the cardboard covering (the thing that hold the stremers in) then take out the "guts" (the stremets) you then should see the fuse, its a littel string with what appears to be paper wrapped around it. pull it out (no dont set it off) just use some needle nose plires or ur finger to grab it and pull softly you dont wat it going off, (it wont hurt if it does, but it isnt a plesent felling) and wa-la you got one, most of my stuff takes 20-500 so...have fun =)
to truly link them, simply hot glue the strings togeather to form a long chaning the TAPE DONT GLUE the fuses togeather, if you glue them they MAY go off due to extreme heat, your done!!!!
note: i have blow may of these up in my hands they dont hurt to bad, but they arent great felings.
Total Comments 5
Comments
-
lol i did this with gunpowder (2 kilos), and some rocks mixed in it
i nearly got blind at one eye :/ damn I'll never forget the painPosted 02-11-2008 at 09:11 PM by Glupus
-
ya dont use, rock.Posted 02-12-2008 at 11:25 PM by 35yeros - what if i use broken glass instead of ???Posted 02-15-2008 at 05:11 PM by Glupus
- lawlz no, glass is worse, it has a blow n' shatter affect, (its goes boom, then millions of pices go everywere) (fyi not smart) but if your in a riot and you dont mind going to jail, make a riot martini, shich a towel in a acholo bottle and throw it, but like i said youll go to jail =\Posted 02-19-2008 at 04:43 PM by 35yeros
- i didnt go to jail =)Posted 02-25-2008 at 04:58 PM by 35yeros
Total Trackbacks 0
