[RELEASE] Universal Aimbot 2.2

This is a discussion on [RELEASE] Universal Aimbot 2.2 within the Counter-Strike: Source Hacks board part of the Counter-Strike Forum category; Short introduction : This little program will help you get headshots. All it does is take a lot of screenshots ...

Page 1 of 4 123 ... LastLast
Results 1 to 10 of 31
  1. #1
    NeSuckS is offline Banned User Array
    Join Date
    May 2009
    Posts
    389
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0
    Reputation
    534

    [RELEASE] Universal Aimbot 2.2

    Short introduction: This little program will help you get headshots. All it does is take a lot of screenshots of the game, a little image analysis, then moves the mouse for you in cs:s. This aimbot is superior to other aimbots out there since it does a bit block transfer directly to an array, then the array is split into colors using minimal cpu usage. All other aimbots that I've encountered use getpixel which is about 200 times slower.

    Release date: December 18, 2011 (2.2)

    VAC status: 100% VAC proof. It doesn't modify the game in any way. All it does is take screenshots of the game and move your mouse.

    Requirements: There are 3 requirements that should be met.

    1. You will need colored skin CT models or colored T models which a material wallhack has, the models can be any color.

    2. .NET framework 4.0 is required. You should have it already through windows update.

    3. Run valve games in WINDOWED MODE.


    Solution to problems:

    • The aimbot is targeting corpses
      • Type cl_ragdoll_physics_enable 0 in console

    • I don't know how to install the material wallhack

    • The aimbot is shaking too much
      • Lower the aimbot sensitivity and disable any CSS mouse acceleration
      • Type cl_showfps 2 in console and change graphic settings to increase FPS to over 60
      • Try using the default aimbot settings instead of playing with the numbers
      • Disable V-SYNC

    • The Aimbot does nothing at all
      • Make sure raw mouse input in css is disabled
      • You need a colored player model to target, look at the picture below to see what I mean
      • DISABLE ALL ANTI-ALIASING!
      • Run the game in windowed mode
      • Run the game in windowed mode
      • Run the game in windowed mode
      • Try turning DWM off/on in the settings tab

    • The aimbot keeps aiming upward
      • Your crosshair is the same color as what you are trying to target, why don't you set the crosshair to green? by typing cl_crosshaircolor 0.

    • The aimbot aims too slowly
      • Increase the aimbot sensitivity

    • What settings should I use with the default aimbot settings
      • Windows mouse sensitivity should be on the 6th notch, windows enhanced precision disabled, the CSS mouse sensitivity your using should be entered in the aimbot, and CSS mouse acceleration disabled.


    What settings you should look out for:
    • Disable vertical sync
      • not doing so will cause the aimbot to aim very badly.

    • Disable anti-aliasing
      • Aimbot won't work with it enabled.

    • Disable RAW mouse imput
      • Aimbot won't work with it enabled.

    • Disable motion blur
      • Causes smearing which could throw the aimbot off.

    • Disable HDR
      • Can cause more smearing with transparent textures.

    • Very transparent wallhack
      • Very transparent wallhacks can cause severe color smearing in certain areas of maps.

    • Anything less than 65 FPS (or monitor HZ)
      • will cause the aimbot to wobble and shake regardless of sensitivity, type cl_showfps 2 and lower settings until FPS is near or above 60 at all times.

    • No css mouse acceleration
      • CSS mouse acceleration isn't for noobs, but setting this to a small amount could help track strafing enemies.

    • Windows enhanced pointer precision
      • Not known if this effects CSS, prolly should keep it enabled to help track strafing enemies if it does do anything.

    • Mouse filter
      • Probably should be disabled since it will average mouse movements making tracking strafing enemies more difficult

    • Windowed mode
      • Always go windowed mode on CS:S/TF2 based valve games - for other games try fullscreen mode.

    • UA aimbot sensitivity
      • You will definitely need to adjust this and find the correct sensitivity. The correct sensitivity also changes for different screen resolutions. Later vers I plan on having the aimbot find the correct setting. Keep raising the sensitivity if the aimbot is failing to track far enemies strafing and lower if the aimbot is shaking too much.

    • Amount to shift down/Amount to shift right
      • These can be set to negative values. The amount to shift down should be set more when sniping since enemies are enlarged.

    • Multi-core rendering
      • Enable this, it will increase your FPS if you got a multi-core cpu. But disable it if TF2 goes BSOD.


    You MUST run valve games (CS:S, TF2, etc) in windowed mode for this aimbot to work! For other fullscreen games, change the screenshot method from GetForegroundWindow to GetActiveWindow. When in windowed mode, you no longer need to move cs:s to the middle of the monitor, the aimbot will aim in the center of the game regardless of where cs:s is on your monitor.







    Universal aimbot 2.2 is outdated and has been replaced by universal aimbot 2.3 click here

    Virus total scan: VirusTotal - Free Online Virus, Malware and URL Scanner
    Universal Aimbot 2.2 DOWNLOAD LINK: Universal Aimbot 2.2.exe

    Changelog: Fixed a bug with being changing hotkeys to letters, Improved motion aimbot, Added ability for aimbot to work with games in windowed mode without needing to adjust the window to the center of the screen, fixed incompatibility with windows xp.

    Dark grid simple version material wallhack: MEGAUPLOAD - The leading online storage and file delivery service
    Normal walls wallhack (90% opacity) recommended, prevents image smearing: MEGAUPLOAD - The leading online storage and file delivery service
    Full ver download link for advanced users wallhack: MEGAUPLOAD - The leading online storage and file delivery service
    Wallhack opacity/transparency modifier: Wallhack Modifier - Modify the transparency of any wallhack!

    More information on how to install the wallhack is found here
    Last edited by NeSuckS; 01-03-2012 at 05:23 AM.

  2. The Following 2 Users Say Thank You to NeSuckS For This Useful Post:


  3. #2
    Syshoock is offline Newbie
    Array
    Join Date
    Sep 2011
    Posts
    7
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0
    Reputation
    0
    First O.o
    This is awsome!!

  4. #3
    kill5all is offline Addict
    Array
    Join Date
    Jan 2010
    Posts
    63
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    10
    Reputation
    5
    Works good thanks!

  5. #4
    muzzied's Avatar
    muzzied is offline Wannabe Member
    Array
    Join Date
    Dec 2011
    Posts
    10
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0
    Reputation
    0
    are these screenshots" getting saved somwhere or are they dumped straight after?

  6. #5
    NeSuckS is offline Banned User Array
    Join Date
    May 2009
    Posts
    389
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0
    Reputation
    534
    Quote Originally Posted by muzzied View Post
    are these screenshots" getting saved somwhere or are they dumped straight after?
    The screenshots get dumped straight after.

    The aimbot firsts asks windows to allocate the amount of memory needed for the 32bit bitmap. The screenshots of the section of the rendered desktop get saved directly to an array in ram for a few milliseconds, which then get overwritten when the next screenshot comes in.

  7. #6
    M1911 is offline Wannabe Member
    Array
    Join Date
    Jul 2011
    Location
    can
    Posts
    19
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0
    Reputation
    0
    2.2 seems a bit shaky if you put 25 shift down compared to 1.6 / 1.57 1.6 settings tab 1 with 25 / 1 / 100 settings tab 2 with 100/100 2.2 Settings tab 1 with 25 / 1 / 100 Settings tab 2 with 100 / 100 / 1 / 100 / 1

  8. #7
    NeSuckS is offline Banned User Array
    Join Date
    May 2009
    Posts
    389
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0
    Reputation
    534
    Quote Originally Posted by M1911 View Post
    2.2 seems a bit shaky if you put 25 shift down compared to 1.6 / 1.57 1.6 settings tab 1 with 25 / 1 / 100 settings tab 2 with 100/100 2.2 Settings tab 1 with 25 / 1 / 100 Settings tab 2 with 100 / 100 / 1 / 100 / 1
    You're putting 25 shift down for 2.2?? Why would you do that?

    Increase amount of x/y pixels to scan and it'll help stop the shaking, also lower sensitivity helps.

    For 2.2 you don't need to use a high shift down settings since the aimbot automatically detects the window border size and shifts down internally. So you can have css in windowed mode taking up the entire screen and only need to shift down by 2 pixels.

  9. #8
    M1911 is offline Wannabe Member
    Array
    Join Date
    Jul 2011
    Location
    can
    Posts
    19
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0
    Reputation
    0
    Quote Originally Posted by NeSuckS View Post
    You're putting 25 shift down for 2.2?? Why would you do that? Increase amount of x/y pixels to scan and it'll help stop the shaking, also lower sensitivity helps. For 2.2 you don't need to use a high shift down settings since the aimbot automatically detects the window border size and shifts down internally. So you can have css in windowed mode taking up the entire screen and only need to shift down by 2 pixels.
    I'm not trying to aim at the head in l4d2 though.

  10. #9
    Maxihell's Avatar
    Maxihell is offline Newbie
    Array
    Join Date
    Dec 2011
    Posts
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0
    Reputation
    0
    does this work on counterstrike online ? i did try though but not sure if needs a CT model or not,so could anyone explain ?

  11. #10
    kill5all is offline Addict
    Array
    Join Date
    Jan 2010
    Posts
    63
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    10
    Reputation
    5
    Quote Originally Posted by Maxihell View Post
    does this work on counterstrike online ? i did try though but not sure if needs a CT model or not,so could anyone explain ?
    Read the description and the part where it says Requirements

Page 1 of 4 123 ... LastLast

Similar Threads

  1. [UNDETECTED] Universal Aimbot 1.5
    By NeSuckS in forum Counter-Strike: Source Hacks
    Replies: 115
    Last Post: 02-03-2013, 05:11 PM
  2. [RELEASE] Universal Aimbot 2.0 BETA
    By NeSuckS in forum Counter-Strike: Source Hacks
    Replies: 63
    Last Post: 06-04-2012, 01:34 AM
  3. [UNDETECTED] Universal aimbot 1.0
    By NeSuckS in forum Counter-Strike: Source Hacks
    Replies: 108
    Last Post: 11-15-2011, 07:22 AM
  4. [UNDETECTED] Universal aimbot 1.3
    By NeSuckS in forum Counter-Strike: Source Hacks
    Replies: 88
    Last Post: 03-06-2011, 06:38 AM
  5. [Release] Universal Aimbot 1.43
    By Pein-sama in forum Counter-Strike: Source Hacks
    Replies: 5
    Last Post: 02-19-2011, 08:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •