Antfamous Gauntlet Bot v1.8 for mmBot

[tschoerk]

Antfamous Gauntlet Bot
Version 1.8
Updated July 12, 2007 Andy+Boneash+Summoner+Travincal+Meph+Eld+Shenk+Dac Farren+Thresh+Nithlatak+Baal For Hammerdin's Only

FINALLY A BOT WITH ALL THE MODS SO YOU CAN CHOOSE TO RUN WHAT YOU WANT TO AND A BAAL KILL SCRIPT...NO WAY!!!


I have been using this with the newest mmbot 5.45, if you have and do not like 5.45 and want to use 5.44 you can download it here.
mmForums Forums-viewtopic-EVERYTHING ABOUT THE LATEST MMBOT SETUP.

The versions this uses is as below.

Meph-Andy V2 pathing B8 by Kuk, but highly modified to my liking.
Baal V2 pathing Beta3 by Kuk, but highly modified to my liking.
Kuk's Nithlatak, but highly modified to my liking.
Ramadash's tele-hammer for travincal, but highly modified to my liking.
WildRobs-Supreme's way of doing Eld, Shenk, Thresh and Dac.(Eld then Thresh and Shenk then Dac)
Funky's Dac Farren and Thresh, but highly modified to my liking.
Jericho's Boneash, but highly modified to my liking.
Et's Summoner(with Kuk's search_arcane.au3), but highly modified to my liking.
Snapper's V2 Pathing for Andy and Meph.
Blargehlin's Act 5 modded Waypoints.
Blargehlin's Newly modded NPC's.
PoweredDeath's New Town Act 5 Mod.
Wildrob's SLot1.au3 and slot2.au3
CURRENT UPDATE AND BUG FIXES
Version 1.8
~FIRST OFF please download newest data mod and newest scripts or your bot will not work.
~Took out the town portal management scripts, because there were many errors if bot got stuck in Act 3 or Act 1.
~Modded the Town Portal Back to its Blue and Orange colors.
~Still uses to town scripts written by myself.
~Fixed a minor bug in the Baal.au3 script
~Noticed a pixel check mistake to check if the Battlenet room was detected, I had wrong Coordinates. FIXED NOW
~Fixed the bug in Search_Arcane.au3 where it would say Failed Script Becasue battlenet room detected, now it works great.
~Fixed the Trav_Tele script.
~Made the Travincal killing quicker and more sufficient. PREVIOUS UPDATES AND BUG FIXES

VERSION 1.7
~No longer uses MMBot original Town Portal Function, Wrote my own Town Portal Function.
~Using Blargehlin's Town Portal Management because since I re-wrote the TP Scripting bot use to run out, not anymore.
~No more .exe for getting to town and back to act 5, they caused problem before, now they are just plain .au3
~Modded TP color a different color, and now in all the to town scripts the bot will tele on top of the TP and enter it.
~MiniMap scripts had problems when entering the TP, new scripting fixes that.
~Summoner script is now so much faster and so much more fail proof (unless major lag), you will definitely see improvement!!
~New Summoner to act 5 is much better, faster and more fail proof.
~Boneash script is better now.
~New Act 1 to Act 5 is much better, faster and more fail proof.
~New Act 3 to Act 5 is much better, faster and more fail proof.
~New Act 5 Tp Script is much better, faster and more fail proof.
~Baal kill script is the best as it can get, never misses Baal (if it finds him), and teleports right on top of him. :)
~Modified and re-done whole Throne sequence, now Redemption is used after each wave and after throne is clear.
~Wrote a script that after Waves are done, it gets drops, Tp's, goes to town, sells and stash, and then back in Tp to get Baal
~I know you ask, what happens it Baal script fails in level 2 or 3, Well bot still goes to town, and re-enters Tp, it knows where it is at, and either goes to Baal or back to town and continues to next boss.
~No longer use CTA_BO.au3, I use Wildrobs slot1.au3 and slot2.au3, they seem to work better.
~Many Many more things I have changed, too much to list. :)

VERSION 1.6
~Okay, fixed the RECOVER.exe thing(I hope), it was missing a important part of it. 
~Took the checksums out of the CTA_BO script, now all you have to do is just make sure your keys are correct. 
~Added longer sleep times when entering the next level of the three minimap scripts. Andy-Meph-Baal. 
~Did some tweaking to the Kill sections of all the sequences, made the delay after teleport a little longer to ensure that bot teleported unto the enemy before hammering.

VERSION 1.5
~Added more detailed step by step instructions in the README, please read it and follow directions.
~A lot less scripts, keys to configure, and no more Separate folders for Andy, Meph and Baal. :)
~Modified and consolidated ALL the Scripts for Andy into one Andy.Include.au3, Catacombs level 4 now uses the calibrated point teleporting.
~Modified the Andy_path.au3 with the HammKill_Andy.au3, now it will teleport through Catacombs, tele to Andy and Kill Andy within one script.
~Modified and consolidated ALL the Scripts for Meph into one Meph.Include.au3.
~Modified the Meph_path.au3 with the HammKill_Meph.au3, now it will teleport through Durance, tele to Meph and Kill Meph within one script.
~Modified and consolidated ALL the Scripts for Baal into one Baal.Include.au3, fixed the bug where it would leave the throne before the waves were done.
~Consolidated the Baal_path.au3, Throne_2.au3 and Throne_.au3 into one script, now it will teleport through worldstone, get to throne, and kill the waves within one script.
~Baal_kill is now better than ever, it will check for Baal after each teleport, instead of teleporting to one side then checking; now it checks after each teleport.
~Modified and consolidated Nihlatak.au3, Vaught.au3 and HammKill_Nila.au3 into one script, now it will tele through halls, tele to Nila and Kill Nila within one script.
~Modified and consolidated Search_Arcane.au3 and HammKill_Summoner.au3 into one script, now it will tele through Arcane, tele to Summoner and Kill Summoner within one script.
~Use's the method of doing Eld then Thresh, and Shenk then Dac like Wildrob and Supreme.
~Combined all the include files for Dac and  Thresh into ONE file for both to read from.
~Modified and integrated the Dac_Farren tele script with the HammerAttack_Dac script, now it teleports and kills Dac within one script!!
~Modified and integrated the Thresh_Tele script with the HammKill_Thresh script, now it teleports and kills Thresh within one script!!
~Completely re-wrote the Act1ToAct5.au3, now it checks for purple pixels of town in about 10 places and check for colors on the mini-map, works great now.
~Completely re-wrote the A5WPTOSTART.au3, instead of click, sleep, click, sleep, which in bad lag would cause the bot to fail, not it is done with pixel searches and mouse clicks to pixels.
~Modified the Summoner to act 5 script, to check if the WP opened up instead of clicking it 3-4 times, not it looks for the purple rectangle and then goes to act 5.
~Modified and hard coded the needed functions for Baal, Meph, and Andy, such as the x and y coordinates to start from, delays, max teleports etc. works much better.
~Consolidated the Bot_Keys.ini down a lot, it now has a lot less settings for you to fill in.
~This bot CANNOT use the original CTA functions; it will not work after the first run. You must use the CTA_BO.au3 included in the download.
~Teleportconfirm.au3 is included in this version again, it is ideal when in the rare occasions, the Enigma loses the teleport skill.

VERSION 1.4
~ALL RIGHT GUY'S THIS VERSION WILL MAKE IT SO MUCH EASIER FOR YOU.
~Added step by step instructions in the README, please read it and follow directions.
~In the readme, I even put the computer settings that your computer needs to have and the in-game options as well.
~All the checksums have been removed from the scripts, now the skill's are called from the Bot_Keys.ini.
~I was a noob when I wrote the Baal_Kill script; I left out an important part of it...LOL, now it is much, much better
~Also added CTA and Precast after you enter Baal's portal, before it was not there, and it is good to BC, then BO, and then Holy Shield when wanting to kill Baal.
~I have taken out the CTA_BO.au3, and have just put the old function of calling the skill's from the .ini(Much Better).
~I have taken out the Teleportconfirm.au3, because it was causing problems for people.
~Now there are no more checksum's to have to worry about, so please download the newest version and you will definitely see the difference.

VERSION 1.3
~Fixed Blargehlin's name to be spelled right..LOL..
~Fixed some wording in the .ini.
~Fixed the number of retries in the Baal_Kill.au3.
~Fixed sleep times in the mmbot.include.au3 so everything will not go so fast and cause errors, now the town functions will be a little slower to help with failed games in town.

VERSION 1.2
~Re-Vamped the Act1ToAct5.exe to search better for the Act 1 colors
~Integrated Snappers V2 Pathing Improvements, it makes the scanning slower but it gives higher success rates, I did not put it in Baal's because you die when the scan is slower there.
~Blargehlin Modded Baal's Corpse for me(Thanks a lot buddy), and I re-did the whole Baal_Kill script, and I must say it is flawless.
~Bot now recognizes if Baal Teleported away or if he died. :) 
~For the people complaining of to many .ini's, I fixed that. Besides your Bot.ini and Sequences.ini, there is only one .ini in the script folder. :)
~The Bot creates a log of everything it has done, if it fails on certain scripts it will tell you in the log what the problem was.

VERSION 1.1
~Fixed a bug in the New_Tp.au3 that if the bot failed that it wouldn’t realize it was in the bnet room, now if it detects a certain pixel and quits the script.
~Unmoded Shenk because with all the mod mix if he was modded it would mess up other aspects of the bot, bot still teleports to where he is and most of the time kills him, I only do shenk for the Juves anyways not the drops.
~Made a Travincal Tele script because when major lag spikes the block teleports would mess up so now the bot teleports in one direction until it read the correct pixels of the anvil.
~When doing Nithlatak, Travincal and Baal, you NEED a strong character or you will die easy.
~Wrote a Andy-Tele script to teleport in Catacombs Level 4 using block-jumping.
~Wrote a script to get you from Act 1 to Act 5 flawless, when done with Andy so she can be done first :) .
~Wrote a follow_Baal script and a Baal_Kill script, PLEASE keep in mind that Killing Baal is not a easy task because he teleports away, so I did the best I could with that script.

EVERYONE READ
Before you start tinkering with your .ini’s and sequences, be sure to read the README.TXT that comes with this. :RTFM:
This SHOULD NOT be the first sequence or script that you try to run with MMBot. If you are new to MMBot try first using one of the stable sequences that are in the sub-forums under Sequences and Scripts on the main page. Also guys please try to keep this thread only for posting my sequence related issues or your run logs after getting it to work. Problems like getting started, doing or skipping Eld, Shenk will not be supported, as these problems can be solved by reading stickies and manuals.

Myself and the MM team are not on this site all day, every day, please post your problems and be patient, someone will help you.
PLEASE read the Facts and Questions below and please read the README.txt before posting your problems. Your problem might already be answered if you just READ!!
PLEASE do not post the same problems over and over again, this will only add unnecessary post's to the thread and slow down support of this forum.
PLEASE do not PM Administrators, Moderators or Myself with problems you are having with the bot, please post your issues here.
PLEASE READ THIS!
This is not intended for all the bosses to be run at once, it is simply for you to be able to choose what you want to run and what you do not want to run.
Please note this bot will NOT give you 90% success rates.
With a good comp and not a lot of lag you should get 65% - 85% rate
Also this is a long run; if you run all bosses together your success rate WILL be low
I run them all from time to time and love my 60% success rate and I get GOOD drops and lots of keys to trade Installation & Configuration
My instructions cover this sequence only, but not the basics of MMbot. If you are new to MMbot you must first read stickies The MMbot Guide and How to configure your keys. Before asking for support, also read sticky MMbot FAQs.
*MMbot must be installed.--> DUH!!!
*AutoIt v3 must be installed. Get it here--> AutoIt v3 - Automate and Script Windows Tasks - For Free!
*If new version of Autoit is causing problems, here is 3.2.2.0(I use it)--> http://www.autoitscript.com/autoit3/....2.0-setup.exe
*Use WinRar to unzip the files. Get it here--> WinRAR archiver, a powerful tool to process RAR and ZIP files
*This sequence is using Smorg's PotBot and in the mm.PKID.ini by setting "Frpot" = "Stash" and "Rpot" = "Stash". PotBot works only with 4 row belts.
*LEAVE THE ORDER OF SEQUENCES AS THEY ARE!! Important: This sequence needs a special Mod, It can be located below. Once the mod is downloaded you have to unzip it, open the data folder, and then unzip it again. Reason for this is it is a very big data folder and needed compressed a few times.
RapidShare: 1-Click Webhosting

Here is a alternate link, PLEASE only use this if you can not download from RapidShare.
data.zip - FileFront.com


After you have read all the documentation and changed ALL your .ini's(mm.Bot.ini, mm.BOT.Sequences.ini and the Bot_Keys.ini) to match your in-game keys then you are ready, Comment what bosses you don't want to run, and you should be set.

Credits
I have enclosed a credits read-me with the bot, if I left anyone out please PM me and I will get you added. I CAN NOT STRESS THIS ENOUGH. PLEASE READ THE README INCLUDED WITH THE DOWNLOAD AND THE FACTS AND QUESTIONS BELOW!!!:RTFM: ENJOY, HAVE FUN AND PLEASE VOTE AND LEAVE FEEDBACK!
If you have not tried to get it to work numerous times or have not asked for help and waited for a solution, then PLEASE do not leave a negative vote or negative feedback until you do. PLEASE BACK UP YOur OLD DATA FOLDERS AND SCRIPTS INCASE YOU DONT LIKE THIS BOT!!


RapidShare: 1-Click Webhosting

HERE ARE SOME QUESTIONS AND ANSWERS ABOUT THIS BOT!!

Q: ZOMG!!! Bot creates the game, open's inventory 10 times then I get First Time Run Error.
A: This can be caused by a couple different things. You could have your belt and inventory keys set up incorrectly which would cause confusion with the bot and have it fail.
To fix that make sure your Show belt key and inventory key are not the same and that they are set up in the appropriate .ini's. Another reason this could happen is that your pixel checksum for potbot are wrong.
To fix this, you need to make sure your screen resolution is 1024 by 768 pixels and that your color quality is 16 bit, and that the rest of the setting's are correct for the bot. Also your potbot could be outdated.
Please locate the latest Potbot/PotThread and see if that helps.

Q: WHAT THE @#$%, the bot kills Andy Opens a TP and then keeps entering it until it fails.
A: This is caused because the bot reads specific pixels in the catacombs and in Rogue Enchantment. If the mod is installed incorrectly or if there was a glitch while installing it then that
Would cause the bot to fail because it cannot detect the correct pixel's it is supposed to be looking for. Another reason for this could be that your Automap key or you clearscreen key is wrong. Your Automap key MUST be Tab
And you Clearscreen key must be SPACE, if it is not then the bot wont be able to see the map, which will cause it to fail. Major Major lag can cause this to because after it enters the TP it has to move around the Rogue Enchantment
Detecting needed color pixels, and if it is lagging and it is not moving then it cannot detect the pixels and will fail.

Q: I don't believe it my success rate isn’t 90%, what the hell is wrong with this bot?
A: If you have everything set up correctly and the mod properly installed, then nothing is wrong with the bot. I will quote what I said in the thread and the readme.
"Please note this bot will not give you 90% success rates. With a good comp and not a lot of lag you should get 65% - 80% rate. Also this is a long run, if you run all monsters." I would advise you to try and not run them all.
I simply wanted you to be able to choose what you want to run and not have to switch folders, and sequences to do it.

Q: OMG!! WTF!! I keep getting failure exitcode on some of the scripts, what’s up with that.
A: You are referring to something like this---Executed Nithlatak.au3 returned failure ExitCode ( < 1 ).
This does not mean that there is a problem with the script; it means a part of the script couldn’t be successfully calculated. For example if the script says to look for a blue square while teleporting to specific coordinates,
And the bot can not detect any blue squares then it is a fail or EXIT(0), when this happens the script has to do something so that is what it does it exits with a failure because it could not complete the actions needed. SO then you ask
Well, what could cause it to not detect it? One reason LAG could cause it, two your life was critical and bot chickened, three a mana burn monster hit you and now you have no mana to teleport, four something got in the way of you teleporting.

[zReapeR]

W/e it is, and why ever I don't play Diablo, big thx for this Bot! +Rep.

[Tresspass]

Got a friend that will want this probably if he makes a pally I'll rep you for the effort

[Senn]

Data.zip links are dead.