L2phx

[Ginzo]

I noticed that alot of people wanted to know how the 3.5 L2PHX version works and so I've decided
to post a tutorial in case you would need it or actually find a server where it works (PM me if you know any and I'll repost here).

1. Download v3.5 from here [Share - Tool][PHX] All Phx Versions

2. Now you need to change the language:



3. Now you will need to set it up:
- Press ' CTRL+P ' : (Will bring settings up)
Now you will have to set your L2PHX accordingly:

(Primary settings)



(Intercept settings)


4.After that just save and enter Lineage 2

5. The window will look like this in L2PHX:

(DO note that the window will change from plain looking to the full interface
as this is a part of the upgrade!)



6. Now you will need to modify the packet in order to get the ++ stuff, so go into the
converter and copy the 6th and 7th numbers in the packet in to the
"Hex" window and follow the instructions in the pic:



7. Now all you need to do is exchange the numbers you got from the Hex->Dec ->Hex converter and
replace them in the "Packet Send" window:


(I ASSUME YOU ALREADY KNOW HOW TO USE THE OLDER L2PHX, IN CASE NOT PLEASE LOOK AROUND
THE FORUMS FOR A GUIDE TO THE 3.4.1.x.x VERSIONS IN CASE YOU DO NOT COMPLETELY UNDERSTAND
THIS ONE!)