[KevinMerge]
Ok im going to show you have to make a bowl out of: Tin Foil and a Pencil.
Step 1: Take about a half page length of tin foil and fold it in half.
Step 2: Take your finger and put it about half way on the tin foil.
Step 3: Roll the tinfoil around your finger until your left with a cylinder shape
Step 4: Fold the tin foil about 2/3's of the way up.
Step 5: Push in the sides of the folded part (1/3) to where it looks good enough to hold your bud.
Step 6: Take the pencil and put it in the hole (2/3).
Step 7: Find a flat surface and push the hole down around the pencil to make it flat and also wrap the excess tin foil around then bottom of the 2/3's part.
Step 8: Pack your bowl and puff away. : D
Ok this time im going to show you how to make a bowl out of an apple. Once again you will need: Pencil, Knife(or your teeth), and an Apple.
Step 1: Cut a round part of the apple out deep enough to hold your bud but shallow enough for the lighter to reach it.
Step 2: Take the pencil and shove it in the center of that hole about half way through the apple.
Step 3: Take it and make another hole about 90Degrees down.
Optional Information (to make a carb)
Step 4: About 90degrees east of the hole your going to be smoking from make another hole to reach the intersecting points of your first to holes.
Step 5: Hold your carb pack your bowl and toke away. : D
Lol hey again this time you will need a: 2Liter bottle, Tin Foil, a Needle, and a Knife.
Step 1: Take the knife and make a circular insert aroun mid way point on the 2liter after you've removed the plastic.
Step 2: Take the Tin Foil and insert it where the cap should be in a bowl form.
Step 3: Take the needle and put tiny holes in the tin foil for the smoke to come through.
Optional Informaion(carb)
Step 4: About 180degrees from the hole your smoking out of make a much smaller hole for your carb.
Step 5: Enjoy your new bowl and smoke carefully.
Ok this one will take about 10-15minutes. You will need: 3-6 pieces of 3 foot long fish tubing, a 3 literbottle, tine foil, Duct Tape(any tape will work i just prefer Duct Tape), a needle, and 2-5 good friends.
Step 1: Cut 3-6 holes according to the number of friends attending. I can't stress this enough make sure they are all even so no one is squished cuz it is a major bk.
Step 2: Insert the Fishing tube into the holes accordingly.
Step 3: Make sure you tape the Fishin tubing EXTREMELY good so that way no smoke escapes.
Step 4: Take the tin foil and put it in a deep bowl shape considering more people = deeper.
Step 5: If you'd like to secure the tin foil tape the ends to the 3 liter bottle.
Step 6: Make sure everything is secure because everything will be moving because of all the people.
Step 7: Put the holes into the tin foil at the top not to think but think enough to get a good amount of smoke through it.
Step 8: make sure everyone is comfortable and smoke away : D
This is the end for now i hope you've enjoyed the segments of How to make a bowl.
There will be more to come shortly!!!