hello guys i would like help making a fake id or a site to download a template

This is a discussion on hello guys i would like help making a fake id or a site to download a template within the Real Life Hacks board part of the General category; ive been searching for a while now looking for fake id templates. i made a bet with my friend that ...

Results 1 to 5 of 5
  1. #1
    urbad is offline Newbie
    Array
    Join Date
    Mar 2010
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    0
    Reputation
    0

    Post hello guys i would like help making a fake id or a site to download a template

    ive been searching for a while now looking for fake id templates. i made a bet with my friend that i can make a id faster then him.
    Do u think u guys can help me out?
    i need to make a driver license templates or get one from a site. most of the ones i have seen are outdated or just terrible.
    thank you


  2. #2
    ItzNitro's Avatar
    ItzNitro is offline Advanced Hacker
    Array
    Join Date
    Dec 2010
    Location
    Durkadurkastan
    Posts
    419
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    6
    Reputation
    135
    It would help by telling us what state/country you're from.

    After finding a template you also need to find a way of printing it on to a plastic card and looking legit.

    Rather than doing this, I would recommend talking to people at school/college about fake IDs; they're more likely to know where to get them in your town/city. I know that in my town, you can get them if you talk to the right people. (:

  3. #3
    35yeros's Avatar
    35yeros is offline Im still on a Boat.
    Array
    Join Date
    Sep 2007
    Location
    N38°52'14" W77°03'19" its funny because it might be true
    Posts
    1,647
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    12
    Reputation
    560
    depends on the state/country

    as for the plastic backing, you can purchase those online, or use an old id card and use cleaning agents to remove the original ink.

    as for printing the info onto the card, you can pick up machines capable of printing for cheap sometimes from second hand electronic stores, or obviously online for a price.

    as for a template....use photoshop CS4-5 its not as hard as it looks if you have a real id to compare it to. or if you want to go for legit, scan the legit id in and just modify the name dates etc
    When in doubt, empty the magazine, They dont pay you to bring home bullets

  4. #4
    Kevin is offline guy

    Array
    Join Date
    May 2007
    Posts
    3,078
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    14
    Reputation
    724
    Quote Originally Posted by 35yeros View Post
    depends on the state/country

    as for the plastic backing, you can purchase those online, or use an old id card and use cleaning agents to remove the original ink.

    as for printing the info onto the card, you can pick up machines capable of printing for cheap sometimes from second hand electronic stores, or obviously online for a price.

    as for a template....use photoshop CS4-5 its not as hard as it looks if you have a real id to compare it to. or if you want to go for legit, scan the legit id in and just modify the name dates etc
    I'm actually quite interested in doing this, if you could link an offer for such a machine you'll earn a .

  5. #5
    Ryan's Avatar
    Ryan is offline Ubiquitous


    Array
    Join Date
    Jul 2007
    Posts
    6,966
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rep Power
    26
    Reputation
    2758
    • 1
      Gather the necessary ID making supplies. You will need teslin paper, butterfly laminate pouches, a pouch laminator, and may want to use an encoder to encode the magnetic strip on the pouch.
    • 2
      Find and edit a ID templates. search a Peer-2-Peer network such as Kazaa, LimeWire or BitTorrent to find a template. By using Adobe Photoshop or Macromedia Fireworks, or a free program like GIMP, you should easily be able to edit the templates. Adobe Photoshop is the most common photo-editing software program used today but can be expensive to purchase, but a free full-featured trial version is available on Adobe's website.
    • 3
      You should begin editing by changing the text fields. Most standard IDs use the font Arial that comes with Windows but if you wish to use specialty fonts that do not come with Windows (such as a font for signatures) you can see how to download and install them by reading this article: Install Fonts On Your PC.
      Edit the eye and hair color fields as follows:
      Eye Color- Indicate eye color abbreviation:
      BLK - Black
      GRY - Gray
      MAR - Maroon
      BLU - Blue
      GR – Green
      PNK - Pink
      BRO – Brown
      HAZ - Hazel
      MUL – Multicolor
      Hair Color- Indicate hair color abbreviation:
      BAL – Bald
      BRO – Brown
      SDY - Sandy
      BLK - Black
      GRY - Gray
      WHI - White
      BLN – Blonde
      RED – Red
      Also, if your ID has restrictions or endorsements here are the codes. Some are rarely used but others, like restriction code B are quite common. Here are a list of some of the more popular codes:
      Restriction codes:
      A - No Restriction
      B - Corrective Lens
      C - Mechanical Aids
      D - Business Only
      G - Daylight Only
      H - Employer's Vehicle Only
      J - Prosthetic Aid
      Q - No Passengers
      R - motorcycles 500 cc & under
      S - to & From School
      T - To & From Medical
      U - all motorcycles except Class X
      2 - Personal Vehicles Only
      Endorsement codes are less common but include:
      M - Motorcycle endorsement for any motorcycle regardless of engine displacement.
      P - Passenger vehicles designed to carry 16 or more persons, including the driver.
      T - Double/triple trailers allowed.
      Y - Farm endorsement (Class A).
    • 4
      Scan in the photo and signature image files. You need to scan in a passport photo or other acceptable ID picture. Also scan in a signature. If the background of the passport photo does not match the background of the state id, you will need to do some editing.
    • 5
      After scanning the passport photo into the computer, the person's face will need to be separated from the background so it flows seamlessly with your ID card template. Using a program such as Adobe Photoshop, Macromedia Fireworks, or GIMP, provides you with an image editing tool called "Magic Wand". This tool will allow you to click a color in the image and it will select all surrounding colors that are similar or the same. There will be a slider that will allow you to select the amount of variance from the color you select. The higher the variance relates to more of the image that will be selected. Once the background is nearly fully selected without containing any of the person's face, press 'Delete' on your keyboard to erase it. You can then magnify the image and use the eraser tool to clean up around the person's face. At this point, zoom out and copy the image. It can be pasted onto your ID card template. It will then flow seamlessly into your template design and you can choose any background color you want!
    • 6
      Add a Barcode. The unusual-looking scrambled barcode on the back of most driver’s licenses is known as a PDF417 barcode. This barcode contains most of the information contained on the front of the license. By editing this readout, you can encode your information into this barcode. You can generate these barcodes by finding a free PDF417 Generator online. Below is the general sequence.
      ANSI 6360263f02DL20393504EM02460010DLDAQ1414556
      DAASMITH,JOHN,A
      DABSMITH
      DACJOHN
      DADA
      DAG423WILSON
      DAIMIAMI
      DAJFL
      DAK044
      DBB190922
      DBA2480922
      DAU511
      DAW170
      DAZBR
      DAYBLU
      DBC2
      DBHN
      DARC
      DBD200684003
      DASB
      DBE1
      DBIN
      EMEMEWPFD
    • 7
      Add a Magnetic Stripe
      If your license requires a magnetic stripe and you want it to be scannable, it can be encoded with an encoder
      . Generally these are very expensive and are difficult to find. Search online for discout suppliers if you like. There are two types of magnetic stripes, HiCo and LoCo. HiCo and LoCo magnetic differ in that HiCo are much more difficult to demagnetize. The encoders for these typically were much more expensive than for LoCo. Most HiCo encoders encode LoCo stripes as well. The best way to program the stripe is to decode a working driver’s license, edit the data, and then program it back onto the stripe. Encode the magnetic stripe after the card is finished.
    • 8
      After editing is done, you can start printing
      You will need to print on a synthetic paper
      . There are two types of synthetic paper that are nearly the same. Teslin and Artisyn paper are single layer, silica-filled, polyolefin printing substrate with unique microporous and temperature resistance features that make it the product of choice for laminated ID badges. Teslin is more expensive than Artisyn and much less versatile. If you want to use a desktop inkjet printer, you will achieve better results with Artisyn or Artisyn NanoExtreme™ synthetic paper. Printing on Teslin with an inkjet does not work well and tends to look grainy and smear. The Artisyn and Artisyn NanoExtreme™ are coated with chemicals to absorb the ink effectively. It is cheaper than Teslin, works well with all types of printers including inkjet and laser printers. It also tends to produce better print quality results. They can be found from sources online. Arcadia also sells perforated sheets that punch out in the size of the ID cards.
    • 9
      Select your printer. The preferred method is to use a pigmented based inkjet printer like an Epson printer with DuraBrite ink. This tends to produce incredible results and works well with Teslin even though it is not a laser printer. Better results are still achieved on Artisyn paper, and for the highest quality results Artisyn NanoExtreme™ should be used. If a pigmented ink printer is not available, a laser printer is still a good result. Laser printers produce sharp and clear results, but the ink tends to look waxy. Lastly, any dye-based inkjet printer will work fine. A dye-based inkjet printer is that standard color printer that most people have in their home. Again, if you use dye-based inks make sure to use Artisyn. You should print on highest quality photo settings.
      Print on one sheet of paper, both front and back.
    • 10
      Cutting.
      If you are using EasyIDea Microperforated Artisyn, you can skip this tedious step. Otherwise, start by cutting out the ID from the paper. Tracing the dimensions of the ID using a butterfly pouch is generally helpful. A paper cutter or X-Acto knife is also helpful.
    • 11
      Laminate.
      You must use thermal laminating in order to bond the butterfly pouch to the synthetic paper. Once laminated, the card will harden and resemble a PVC card. You must use a thermal (heat) pouch laminator. Avery, Arcadia EasyIDea, or GBC makes good ones that run around $50. If you can't afford a laminator then you can use a standard home iron. This is a little more tricky as you have to make sure the iron doesn't get so hot that it melts the laminate plastic but is still hot enough to bond the laminate to your ID. Also be sure the iron does not have any water loaded into it as this could damage the ink on the pre-laminated ID and the steam could warp the ID card.
    • 12
      Place the insert into the butterfly pouch. You must place the card into a carrier. Run the carrier through the laminator. Immediately following lamination, it is helpful to place the card under something flat like a book so that it cools flat.
    • 13
      Apply a hologram.
      Generally, it is acceptable to use a generic hologram. Very few people actually examine the hologram and read what it says on it. If you’re concerned about making something that looks truly authentic, there are other methods to replicate holograms. The Shield and Key hologram is the most commonly used generic hologram and is a transparent rainbow hologram. This means that it looks transparent when looked at directly but when tilted to the sides the hologram lets off a rainbow spectrum. This is my generic hologram of choice when making fakes. This type of hologram is pretty much impossible to duplicate using the Pearl-Ex method below.
    • 14
      Making a Hologram
      The gold holograms on many ID cards are called binary holograms
      . These holograms can be easily reproduced using Pearl-Ex paint and Photo-EZ paper.
      This product is for making stencils. A stencil is basically the outline of a picture with the negative part missing. To make the stencil you scan the hologram off your id, then convert it to an all black image. Next you print the image on a transparency. A transparency is a transparent sheet of plastic meant for inkjet printers or lasers. Then you take the transparency and tape it to the Photo-EZ. You put it out in the sun and all the areas of the material not covered by the black negative of the holo cures. When washed the part covered by the negative washes away, leaving you with your stencil. You will want to order the high resolution material.
      As for the painting material, the two main ones are Interference Gold (Fine) made by Golden Acrylics and PERL-EX DUOTONE. The latter of the materials work best because of the fact it reflects two colors of the spectrum. Perl-Ex comes as a powder and preparation is needed. These paints are transparent when viewed from straight on. When viewed from different angles you see different colors depending on the particular colors of the paint. Perl-Ex comes in Duo Red-Blue, Duo Blue-Green, and Duo Green-Yellow.
      You have to buy a Transparent Base made for paints to prepare the Perl-Ex. A good one is Speedball Transparent Base. You mix in a 1:50 ratio. 1 part Per- 50 parts base. If you are using Golden acrylics then you use a 5:1 ratio. 5 parts paint 1 part base. When applying the paint in the stencil, you should use if possible one of those brushes made for screen printing. It is like a pencil but with a flexible tip. A sponge can be used but extra care needs to be taken when applying. You want to apply a very thin amount and practice will be needed to get it right.
      On a lot of the new IDs there is a multicolored hologram that reflects the full spectrum (like a rainbow). This is especially true of most of the Canadian ids. What you do is pick the two most dominant colors and buy the matching Perl Ex colors. This will be good enough to reproduce the holo. The holo can be put directly on the finished ID or before lamination on the inside of the pouch. If you choice is the inside then remember to put it in the reverse.
    • 15
      You’re ready for the finishing touches.
      It is recommended that you sand the edges of the hologram with a very fine grit sandpaper. This removes the jagged edges of the synthetic paper. You should lightly sand the front and back of the id to give it a more worn look.
    • 16
      These instructions were to make a 30 mil drivers license that resembles a PVC card. If you want to make something thinner that bends corner to corner like some ID cards, you can remove the front part of the butterfly pouch and simply laminate the back of the pouch with the synthetic paper. Many machines use this method, but it can be accomplished manually. You can also replicate signature strips by scratching the surface of the butterfly pouch with sandpaper.




    For educational purposes only, of course.


  6. The Following 2 Users Say Thank You to Ryan For This Useful Post:


Similar Threads

  1. Good site to download movies?
    By pvtpuffbal in forum Entertainment
    Replies: 2
    Last Post: 02-16-2010, 11:45 AM
  2. Need Help Making Site for Release of SearingWOW !
    By Sac in forum Advertise your Private Server
    Replies: 0
    Last Post: 11-18-2008, 05:17 PM
  3. Download Anything From A Site For Free!
    By Toxik in forum General Chat
    Replies: 1
    Last Post: 06-08-2008, 10:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •