AgBot Release

[hendricius]

Since there have been a lot of questions about RevBot - especialy for Vista users - I decided to make a new thread about it so everyone can read 'how to' in the first post.

I will collect this information out of this thread, out of the one from Gear123 (Thank you) and what i found out myself (about vista)


Read THIS post and SEARCH BEFORE!! asking questions!

Important!: If you have any information that fits in this post, send it to me or post it in here and if it's usefull i'll add it.. credits to you!

No this is NOT a loop version! Maybe it'll come in the future!

Update:

Little guide to make the bot work
Thanks to Herm1t


First you will need the following files

OCX files

RapidShare: 1-Click Webhosting


Library Files

http://www.ascentive.com/support/new/libraryfiles.exe


No-DC Client

RapidShare: 1-Click Webhosting


agBot version 1.55 ( IMO ver 1.55 is the best release to date. )

RapidShare: 1-Click Webhosting



and maybe regvac

RapidShare: 1-Click Webhosting

***** Installation ******

1) Register the OCX files

copy VbEcplipse.ocx into C:\Windows\System32



then click start > go to the "run" box, then type the following:


regsvr32 "C:\Windows\system32\VbEclipse.ocx"


and press enter


Repeat the above for the 2 other ocx files ( comctl32.ocx and comdlg32.ocx)

ie. use regsvr32 "C:\Windows\system32\comctl32.ocx"

then use regsvr32 "C:\Windows\system32\comdlg32.ocx


2) Download the "library files" and install them


3) Having extracted ver 1.55 of agBot to any folder
Copy MediaPatcher.exe into C:\Program Files\Silkroad and run it
(it will create 2 files port.bak and ip.bak)



4) replace sro_client.exe with the one from the 1.44 No-DC client

(make sure to rename the original sro_client first ie. rename it to sro_client.old or sro_client.144)


5) run "nuConnector Config.exe" and change the IP address from .26 to .27 (last octet)


6) now Run nuConnector.exe


7) Run agBot.exe


start silkroad



Most important. If you have been struggling to get agBot to work with a realease later than 1.55, I suggest you uninstall silkroad, then run a good registry cleaner (regvac) before re-installing and updating the client to 1.44, then follow the above steps.

Once installed use the guide site for help with configuration.



Howto fix invalid target:
Thanks to zangetsu123

I used to get ALOT of invalid targets while picking up items.. Bot stops for a long time and didn't pick up items that dropped like gold/alchemy items etc etc ..
So the solution is as following;
Raise process priority of agbot above normal (It wont hurt your other programs when you raise process priority of agbot) once you did that.. all invalid target and other problems like picking up stuff will be removed..
Atleast its working for me ..
agBot is working for me like Tbot or any other bot without any bugs etc xD
add thanks please if I helped and if its really helpfull add this to main page troubleshoots

add

Pfft.. not a dog you know



Howto fix the closing nuConnector when starting sro:
Thanks to kikyou2

1.Open nuConnector Config.exe
2.Edit the ip from 121.128.133.26 to 121.128.133.27
3.Click on "Create Config File"
4.Click on "Ok"
5.Bot as always without closing Nuconnector



Howto Multiclient with Revbot & Loader v6:
Thanks to SpriGgy

* First you need a clean & up to date Version of Silkroad
* Then extract the Loader in it
* Copy the whole Silkroad Folder to a other Location and Rename it to any Name For example "Bot"
* Then extract the Revbot 1.4.7.2 Package in the Second Folder "Bot", und start Mediapatcher.

Now how to use it:
* Go back to clean Silkroad Folder & Start Loader.exe,
* Login your Stall char or the one you want to LVL
* Go to the Second Folder, called "Bot", start NuConnector.exe, than start agbot.exe and then Loader.exe,
* Login the char that will Bot
* now you have 2 chars logged in, hf


Skill Delay Fix
Thanks to TBone0072!

To fix the skill delay go to your C:\Program Files\Silkroad\data and open skill.txt

There you search for the skill that you are using. Like you're using elitepvpers-flame (example), go and search for elitepvpers-flame.

If u found it, then you need to change the numbers in the line as following;

After the first number which is the level of the the skill, change the next 5 numbers to 0.
Leave the next 6 numbers as they are and change the last number to 0. Do all your attack and imbue skills this way.

Example:


First you have this

"1B000000","SKILL_CH_SWORD_SHIELD_A_01","Castl e shield",10,0,0,0,60000,15000,182,0,1,257,2,0,1


And after editing you have this

"1B000000","SKILL_CH_SWORD_SHIELD_A_01","Castl e shield",10,0,0,0,0,0,182,0,1,257,2,0,0



Vista Problems (and sometimes WinXP):



Missing .ocx Files
Some people are getting error 339 (Missing .ocx file).
This are most of the time two files, first VbEclipse.ocx and after that comctl32.ocx and comdlg32.ocx. What to do with this error:


You need to have the three files: Click


Put the three files in your system32 map (C:\Windows\System32\). Stay in the system32 map and search for cmd. RightClick on it and run it as an admin. The command prompt will open. Type: "regsvr32 C:\Windows\System32\VbEclipse.ocx" without "" and press enter. It'll say the file is registered.

Another line to fill in: "regsvr32 C:\Windows\System32\comctl32.ocx" without the "" and press enter again.

And the last file to register: type: "regsvr32 C:\Windows\System32\comdlg32.ocx" without the "" and press enter for - finaly - the last time



MOST QUESTIONS ABOUT THIS: agBot DOESN'T SHOW UP!!! (Vista)
If you work with XP, try installing the library files. On the bottom of this thread you can find a link!!!
This has to do with the Admin stuff. Solution:
First if you have patched with MediaPatcher, unpatch it.

After that, go to your silkroad folder (Standard: C:\Program Files\Silkroad) and select agBot.exe, nuConnector.exe and MediaPatcher.exe. One by one please . Right click on the file you selected and click properties, then select it to run as an administrator.
Patch the game and now it should have fixed the problem. But don't forget to run the bot and nuConnector as an admin!!!


Links:

Downloads:

About Fixed EXE downloads!

If you are complete new to the bot and you want to bot with the new version, u have to download one of the old versions too. This is because most of the time the new bot versions just have a fixed EXE, like it says behind the bot name.

So if you want to download the newest bot - 1.5.2 atm - you have to download the old (1.4.7.2) to. The files in the 1.4 version, u put in ur sro folder and you run it normal, except for one thing.. place the fixed EXE in ur sro folder to. U start the bot with the new EXE instead of the old one and it'll work fine

agBot 1.4.7.2

Rapidshare: Click
Mirror: Click
AgBot Fix for 1.7.4.2: Click

agBot 1.5

Rapidshare: Click
Filefront: Click

agBot 1.51 Fix Exe

Rapidshare:Click
Filefront: Click

agBot 1.5.2 Fix EXE

Rapidshare:Click
Filefront:Click

agBot 1.5.3 Package

Important: New (great) update; Map download and Bot download are seperate so the download will not take this long, and the unpacking will not take this long. (Also see update)
v1.5.3
RapidShare:Click
Filefront:Click

Map
Rapidshare:Click
Filefront:Click

agBot 1.5.4.3

Rapidshare:Click
Filefront:Click
For the map files look at 1.5.3

agBot 1.5.4.3 FIX

Rapidshare:Click
Filefront:Click

agBot 1.5.5

Download the map files to!!!
Rapidshare:Click
Filefront:Click

agBot 1.6

Download the map files to!!!
Rapidshare:Click
Filefront:Click

agBot 1.6.1

Download the map files to!!!
Rapidshare:Click
Filefront:Click

agBot 1.6.2

Download the map files to!!!
Rapidshare:Click
Filefront:Click

Files

Download Link for the LibraryFiles: Click
Download Link for the .ocx Files: Click
Download Link for All-In-One: NOTE: bot version 1.7.4.2!!!Click

Links:

Webpage of Bot:The 6th revolution - Main
Wiki-page of Bot:Main Page - AgBot Rev6
Testosterone (C19H28O2)
GreYFoX NoDC Client


Guide for mc, how to install, how to use, etc.!
Guides



#status - inVincibLe

All credits go to the original creator

[vanceon]

hmm wonder if this still works